Entering Admin Mode

<< Click to Display Table of Contents >>

Navigation:  Programming >

Entering Admin Mode

Press *(Admin PIN )# the VDP103 will beep 2 twice and the light behind the name panel will flash slowly.

If an incorrect PIN is entered the VDP103 will beep 4 times.

 

For security reasons it is best to change the Admin PIN during installation. See Changing the Admin PIN

 

Note: Default Admin PIN = 999999

 

Exiting Admin Mode

Pressing the * key until the panel stops flashing will exit admin mode.

The VDP103 will beep 3 times and exit admin mode if nothing is pressed for 30S.