Programming > Adding a Card or Fob > Adding using the Add Card

Swipe the master add card or fob 3 times within 10 seconds (2 beeps, 2 beeps, 3beeps). The name panel will flash slowly.

Swipe the card or fob that you wish to add (double beep). Keep swiping cards or fobs until you have finished adding.

To exit adding mode swipe the master add card or fob again(single beep) or wait for 1 minute.

4 beeps indicates that it has failed.

To exit adding mode swipe the master card again(single beep) or wait for 1 minute.

Note: Cards and fobs added this way can only be deleted using the card or fob or else all cards and fobs will have to be deleted.