PID = Perimeter Intrusion Detection

<< Click to Display Table of Contents >>

Navigation:  AI Features - IPCND714 >

PID = Perimeter Intrusion Detection

 

Perimeter intrusion detection can be set to trigger an alarm event when movement is detected in a set area.

 

pid-ipcnd714

 

Enable = Enable / Disable this AI feature.

 

Sensitivity - Determines how much activity or movement is required to generate an event. Options are 1 - 4.

 

1 = Lowest sensitivity level, a significant amount of movement is needed to trigger.

 

4 = Highest sensitivity level, only a small amount of moment is needed to trigger.

 

Detection Type - Options are motion, pedestrian, vehicle or both pedestrian and vehicle.

 

Rule Number - Up to 4 areas can be set independently in the image area. Use this to enable / disable each of the 4 rules.

 

Rule Enable - Tick to enable or disable the detection that rule for the rule number selected.

 

Rule Type - The determines how the direction of moment over the perimeter is handled.

 

A to B (A->B) = Only movement in the direction A to B will trigger.

B to A (B->A) = Only movement in the direction B to A will trigger.

A or B (A<->B) = Any moment direction over the perimeter will trigger.