Example (Sky Router)

<< Click to Display Table of Contents >>

Navigation:  Troubleshooting > Unable to connect to 5G network segment >

Example (Sky Router)

Manually adjust the name of one of them so that you can tell them apart. Adding 5G or similar to the end of the 5GHz SSID would be sufficient.

 

1. On a browser type the IP of the router (sky = 192.168.0.1)

 

2. Go to Wireless then 5GHZ Wireless Setting

 

3. Add "5GHz " to the end of the SSID, then untick "Synchronise 2.4GHz and 5GHz Setting"

 

4. Click Apply

 

5. Once the RoomWatch has been setup on WiFi, then band steering can be set back to the original setup.

 

 

Note - For more detailed information on setting separate bands, then visit the router manufacturer website.