SEE892 - Quick Start Guide
The SEE892 eyeball has a tough metal exterior, ideal for both outdoor and indoor uses with multi format output modes including; TVI, AHD, CVI and CVBS. IR range up to 40m (true day/night filter).
|
Powering the camera The camera has a 2.1mm socket which requires 12V DC and the current consumption is 400mA, so use a regulated power supply rated at 500mA or above.
The camera is polarity sensitive so connections must be correctly made. |
The camera has a standard BNC connector for the 4-in-1 video output. As default the output is set to HD-TVI 2MP which will work with the, ZipLite, ZipSupa and ZipXtreme DVRs, however the output can be changed to AHD, CVI or CVBS if required.
|
OSD Camera Menu Via an DVR with a monitor & mouse direct to access the Cameras menu via coaxitron:- 1.Click on the image in Live view 2.Click on the PTZ button at the bottom of the screen 3.Click on the IRIS + button to display the menu
Use the directional arrows to move up and down through the menu. Use the directional arrows left and right to change the option. Use IRIS + to select and enter that menu option.
Motorised Lens Control Use Zoom + and - to zoom in and out The camera should automatically focus when Zoom +/- is released |
Resolution |
2MP |
Lens Type |
2.8-12mm Motorised |
Image Output |
1 Volt Peak-Peak 75 ohm |
Min.Illumination |
0 Lux IR On |
Day/Night |
Mechanical (True Day-Night) |
IR Range |
40m |
Input Voltage |
12V DC |
Current Consumption |
500mA (IR On) |
IP Rating |
IP66 |
Video Connection |
BNC Socket |
Power Connection |
2.1mm DC Socket |
Finish |
White/ Grey |
Build |
Metal |
Dimensions |
135mm (Diameter) x127mm (Height) |