How to IP static settings on Bardi samrt camera – Setting a static IP address on a Bardi smart camera is useful if you want to connect the camera to recording devices like NVRs and DVRs. This allows the Bardi camera to display on the monitor. To change and set the static IP on the Bardi camera, this can be done via the Bardi Smart Home application.
Below is a guide with pictures to change and set the IP address of the Bardi smart camera to static.
IP Static Settings on Bardi Smart Camera
Step 1 – Open the Bardi Smart Home app.
Step 2 – Log in to the Bardi app using your registered account. You’ll then be automatically redirected to the dashboard page.
Step 3 – Tap on the camera.
Step 4 – Next, a live camera view will appear. Tap the three dots in the top right corner to enter the settings page.
Step 5 – Scroll down on the camera settings page, then tap on the ONVIF menu.
Step 6 – Tap on Mode to select the mode, change the mode from Dynamic IP to Static IP. Tap the Confirm button to save.
Conclusion
Well, now the Bardi camera IP address has become static. You can use this static IP address to connect the camera to other devices using Bardi’s ONVIF feature or for live streaming using an RTSP URL. It is worth noting, after we conducted the experiment, that the IP address on the Bardi camera cannot be changed, it follows the IP segment of the router, even though it is static.
We hope this guide has been helpful. This concludes our guide on how to configure a static IP address on a Bardi smart camera. If you have any questions, please leave them in the comments section.