I also just learned that the TP-Link VIGI NVR can be used to provide internet access, much like a Wi-Fi router. However, using it to provide internet access to other devices is not recommended. The wireless network on the VIGI NVR is intended for connecting Wi-Fi cameras that are also TP-Link products, such as TAPO. This way, TAPO cameras not only gain internet access but can also connect directly to the VIGI NVR.
This guide will explain how to enable the Wireless feature on the TP-Link VIGI NVR for Wi-Fi camera access.
Should I Enable the VIGI Wireless NVR Feature?
If you have a question like this, the answer is: it’s not necessary.
You can manually enable and disable the wireless feature on the VIGI NVR. By default, the VIGI NVR’s wireless feature is disabled. This wireless feature is only an option if you want to directly connect a Wi-Fi camera located near the NVR. It also serves as a solution to allow your Wi-Fi camera to access the internet when the main router is far from the camera.
How I Enabled the Wireless Feature on the TP-Link VIGI NVR?
It’s easy! To enable wireless networking on a TP-Link VIGI NVR, you can do so by opening the NVR’s settings menu. Here are the steps based on our experience, and you can follow them.
Please follow the steps I’ve outlined below.
Log in to the NVR using your username and password, or using a pattern lock. These NVR login credentials were created when the NVR was activated.
Select the Settings menu.
Next, select the Network > Wireless Settings menu.
Look on the right, tap on Wireless Network, make sure the button turns green indicating the Wireless feature is active.
Change and fill in the SSID name and password as needed.
Tap the Save button to apply the changes.
Frequently Asked Questions (FAQs)
What Is the Wireless Feature on the TP-Link VIGI NVR?
This is a built-in feature that allows the NVR to broadcast a wireless network, such as Wi-Fi.
Can This Feature Be Used to Access the Internet?
Yes, you can use the VIGI Wireless NVR feature to connect your phone, laptop, Wi-Fi camera, and computer to the internet.
Is This Feature Free?
Yes, it’s free.
Conclusion
How do you do it? It’s easy, isn’t it? Yes, of course. By enabling the wireless network feature on your TP-Link VIGI NVR, you can connect VIGI cameras (such as the VIGI C540-W) to the NVR without using a network cable. Simply connect the cameras to the NVR’s Wi-Fi network and they’ll connect instantly.
That concludes the complete guide to enabling wireless network settings on a TP-Link VIGI NVR. We hope this is helpful, and if you have any questions, please leave them in the comments section.
