Hikvision Camera Login: Default IP Address, Username and Password, How to Find It?

Hikvision Camera Default IP Address, Username and Password

Setting up a new Hikvision IP camera for the first time? Before you can access the camera, change its network settings, or connect it to an NVR, you’ll need to know how to access it on your network. Knowing the camera’s IP address and username helps you access its settings and configure it for your surveillance system. These details are especially useful when connecting a new camera to an NVR, configuring network settings, or accessing the camera through a web browser or compatible software.

In this guide, I’ll walk you through the default IP address and username of Hikvision cameras and explain how these details help you get started with the initial setup.

The Default IP Address of a Hikvision IP Camera

The default IP of Hikvision camera is 192.168.1.64.

If the default IP address cannot be accessed, the seller has changed it, and you can file a complaint with the seller for an exchange. Basically, the default IP address of the Hikvision camera will not change if it has not been changed.

Hikvision IP cameras also support DHCP. When you connect a camera to a router with DHCP enabled, the router automatically assigns an IP address to the camera.

The Default Username and Password of a Hikvision IP Camera

The default username of Hikvision IP camera is admin.

The Hikvision camera username can be seen on the label attached to the box. This username is used to log in to the Hikvision camera’s settings page and has no default password. The Hikvision camera’s password is set when the device is activated. Therefore, when you access a Hikvision camera and are immediately directed to the login page, the camera is already activated.

If that happens, you can exchange the product or reset the Hikvision camera.

Update—October 28, 2026:

How to Access a Hikvision IP Camera Using Its IP Address?

Connect the camera to your laptop or PC using a LAN cable. Then, configure your computer’s IP address to match the Hikvision camera’s network segment.

For example:

If your Hikvision camera’s IP address is 192.168.1.64, set your laptop or PC’s IP address to 192.168.1.100. The key is to keep the first three octets the same (192.168.1) and choose a different last number between 2 and 254 that isn’t already in use on the network.

Once everything is configured correctly, open 192.168.1.64 in your web browser. You should see the camera’s login or activation page.

Frequently Asked Questions (FAQs)

What Is the Default IP Address of a Hikvision IP Camera?

The default IP address for Hikvision IP cameras is 192.168.1.64.

What Are the Default Username and Password for a Hikvision IP Camera?

The default username is admin. Hikvision cameras do not have a default password; you create one when activating the camera for the first time.

Can You Change a Hikvision Camera’s IP Address?

Yes. You can change the camera’s IP address through its web interface or by using Hikvision’s HiTools Delivery software.

Conclusion

After reading the explanation above, we hope you now know the default IP address and username on Hikvision cameras. Hikvision cameras don’t have a default password. This IP address grants access to the camera. The username and password are used to log in to the camera, allowing you to perform necessary settings, such as changing the IP address and so on. Looking for the IP address and password for a Hikvision NVR/DVR? You can find them in my article about Hikvision NVR/DVR IP addresses, usernames, and passwords.

That concludes the information about the default IP addresses and usernames for Hikvision cameras. We hope this information is helpful, and if you have any questions, please leave them in the comments.

Leave a Comment