EZVIZ camera default IP address, username and password – EZVIZ cameras are smart cameras that connect directly to the nearest Wi-Fi network at the camera’s installation location for online access. Users can also connect the camera to a recording device.
Below is an explanation of the default IP address, username and password of the EZVIZ camera.
EZVIZ Camera Default IP Address
There is no default IP address for EZVIZ cameras.
The EZVIZ camera’s IP address automatically follows the IP address of the Wi-Fi network it’s connected to. For example, if your Wi-Fi router uses the IP address 192.168.2.x, the EZVIZ camera will automatically use the same IP address segment, 192.168.1.x.
You can also change the EZVIZ camera ip address using SADP and EZVIZ Studio.
EZVIZ Camera Default Username and Password
The EZVIZ camera username is admin and the password is the verification code attached to the camera.
The username and password on an EZVIZ camera are typically used to connect the camera to a recording device. EZVIZ cameras can also be accessed via RTSP. RTSP on EZVIZ cameras must be activated before use.
Conclusion
EZVIZ cameras don’t have a default IP address. The EZVIZ camera’s IP address is based on the Wi-Fi network it’s connected to. You can find the camera’s IP address in the settings menu and replace it with the desired IP address. The EZVIZ camera’s username is admin, and the password is the verification code printed on the camera’s label.
That concludes the information about the default IP address, username, and password for EZVIZ cameras. We hope this information is helpful, and if you have any questions, please leave them in the comments.