How to set up a hikvision Smart Managed PoE Switch from scratch – Yesterday, I just received an order for a Hikvision Smart Managed PoE switch, along with setup instructions. Unlike unmanaged PoE, managed PoE requires activation before it can be used. In this guide, we’ll cover how to quickly set up a Hikvision Smart Managed PoE switch in an easy-to-follow manner—even if you’re a beginner.
Whether you’re installing IP cameras, access points, or a small office network, this step-by-step guide will help you get everything up and running fast.
What Is a Hikvision PoE Smart Managed Switch?
Hikvision offers two models of POE switches: a standard POE switch and a manageable POE switch, the Smart Managed POE Switch. These devices are typically used to power cameras and connect the cameras to the NVR.
The main functions of a PoE (Power over Ethernet) managed smart switch are:
- Power devices like IP cameras using Ethernet cables
- Manage Port
- Configure VLANs, ports, and basic security features
Complete Guide to Setup Hikvision PoE Smart Managed Switch
What You Need Before Setup
Before you start, here are the necessary devices and supporting tools based on what we did when setting up the Hikvision Smart Managed Switch POE:
- Hikvision PoE Smart Managed Switch
- Ethernet cables (Cat5e or Cat6 recommended)
- A laptop or PC
- Power source
Step-by-Step Instructions
Step 1 – Set your laptop or PC’s IP address to match the IP address of the Hikvision Smart Managed PoE Switch. For example, the default IP address of the Hikvision Smart Managed PoE Switch is 10.180.190.200. You can set your laptop or PC’s IP address to 10.180.190.201.
Step 2 – Open a web browser and access the device’s IP address.
Step 3 – Activation page. Please enter a password. It should be strong and easy to remember. Tap the Activate button.
Step 4 – Network Configuration. Change DHCP to Static and tap Save button.
After completing the setup, verify it by connecting the camera or testing the internet connection. If successful, your PC or laptop should have internet access and the camera should be able to display video on the NVR.
Common Issues and Quick Fixes
1. Can’t access the switch
- Check IP address
- Make sure your PC is in the same IP address & subnet
- Factory reset the PoE
2. Device not getting power
- Verify PoE is enabled
- Check cable quality
3. Slow network
- Review VLAN or port settings
- Avoid overloading a single port
Conclusion
Installing a Hikvision PoE Smart Managed Switch doesn’t have to be difficult. Once you follow the steps—connecting, accessing, configuring, and testing—you’ll have a stable and efficient network in no time. The guide above is based on our own experience and is easy to follow.
We hope this guide has been helpful. If you have any questions, please feel free to ask in the comments section.