HiLook DVR default IP address, username and password – One of the things NVR and DVR users often look for is the default IP address, username, and password. Usually, this information is useful for CCTV technicians who need to access the NVR or DVR through a web browser or use the default IP address to connect it to other devices, such as a Hikvision NVR.
In this guide we will explain the default IP address, username and password on the HiLook DVR.
What is the default IP address for HiLook NVRs and DVRs?
The default IP address for most HiLook NVR and DVR is 192.168.1.64 or 192.0.0.64.
The IP address on a HiLook DVR acts as its unique address when it’s connected to a network. You can easily change this IP address through the settings menu on the HiLook DVR, depending on your needs.
Without an IP address, the HiLook DVR cannot connect to the internet.
What are the Default Username & Password for HiLook NVRs and DVRs?
The default username for most HiLook DVR is admin.
The HiLook DVR doesn’t have a default password. The DVR password is set or created when the DVR is first activated. During the activation process, there’s a section for creating a DVR password. If the first time you turn on the HiLook DVR and it displays the login page, it means the DVR has been activated by someone else.
You can reset the HiLook DVR to factory settings if that happens.
If your HiLook NVR or DVR is connected to the router via DHCP, its IP address may change based on the address assigned by the router. You can check the current IP address by opening the settings menu on the monitor display.
How to Access HiLook NVRs and DVRs Through a Web Browser?
First, configure the IP address of your HiLook NVR or DVR so that it’s on the same network as the laptop or PC you’ll be using.
Open a web browser.
Then, enter the IP address into your web browser’s address bar. If everything goes smoothly, the login page should appear on your screen. Enter your username and password to log in to the dashboard.
Conclusion
So, the HiLook DVR has a default IP address of 192.168.1.64 or 192.0.0.64.
The username is admin and there is no default password. The HiLook DVR password is determined when the device is first activated. If you purchased a new HiLook DVR and the login page appears when you turn it on, it means the DVR has been activated by the seller.
That concludes the information about the default IP address, username, and password for your HiLook DVR. We hope this information is helpful, and if you have any questions, please leave them in the comments.