How to change the IP address on Hikvision DVR/NVR – Changing the IP address on a Hikvision DVR or NVR is a crucial step when setting up the device to connect to a new network, avoiding IP conflicts, or configuring remote access. If your device isn’t configured correctly, you may not be able to access it from a computer or mobile app.
In this guide, you’ll discover how to change the IP address on a Hikvision DVR/NVR step by step, based on our personal experience.
Why You Need to Change the IP Address?
There are several reasons why you might need to update the IP address of your Hikvision device. These include adapting to new network settings at your location, avoiding IP address conflicts, and ensuring the device connects to your router. However, for some of the reasons mentioned above, changing the IP address allows the device to connect to the internet.
There are three methods you can use to change the IP address on a Hikvision DVR/NVR, which we will discuss one by one:
- Via the on-screen menu
- Via the SADP Tool application
- Via a web browser by accessing the device’s IP address.
Methods to Change the IP Address on Hikvision DVR/NVR
Requirements
- A Hikvision DVR or NVR connected to your network
- A computer or laptop
- The device’s current IP address Admin username and password
- SADP Tool (optional but recommended) – Read how to install and download SADP Tool for laptop or PC.
Method 1: Change IP Address Using DVR/NVR Menu
Step 1 – Right click on the screen and select Menu.
Step 2 – Log in to the DVR/NVR using your username and password. Or log in using your pattern lock.
Step 3 – Select Configuration.
Step 4 – Select Network > General
Step 5 – Move the toggle switch for DHCP (IP4) to Off. Then, enter the IP address as needed. Tap the Apply button to save the settings.
Method 2: Change IP Address Using SADP Tool
Step 1 – Open SADP Tool on your PC or laptop.
Step 2 – It will automatically detect Hikvision devices on your network. Select your DVR/NVR from the list.
Step 3 – Change IP address.
Step 4 – Enter the admin password, then click the “Modify” button to save the settings. If the “Parameters Modification Completed” notification appears, the IP address has been successfully updated.
Method 3: Change IP Address via Web Browser
Step 1 – Open a web browser.
Step 2 – Enter the current DVR/NVR IP address. In this guide, the current IP address is 192.168.1.13.
Step 3 – Log in to the web interface using the previously created username and password.
Step 4 – Go to Configuration > Network > Basic Settings.
Step 5 – Disable DHCP.
Step 6 – Enter the new IP address as needed and tap the Save button to save the settings.
Static vs DHCP: Which One Should You Use?
It’s important to understand that changing the IP address automatically changes the DVR/NVR’s IP address to static. So, which is most recommended? Here’s the difference between static IP and DHCP.
Static IP (Recommended)
- Fixed IP address
- Better for remote access and port forwarding
- Prevents IP conflicts
DHCP
- Automatically assigned by router
- Easier setup
- May change over time
Troubleshooting: Cannot Access Device After Changing IP
Some device owners have tried changing their IP address and encountered the issue of their device being inaccessible. If you’re experiencing the same issue, try these steps:
Check Network Range
- Ensure the new IP is in the same subnet as your router
Verify IP Address
- Double-check for typing errors
Restart Device
- Restart the DVR/NVR after changing the IP address.
Use SADP Tool
- You may be accessing the wrong IP address. Scan your network to find the correct IP address.
Conclusion
Changing the IP address on a Hikvision DVR/NVR is a simple yet crucial step in network configuration. Whether you use the device menu, the SADP Tool, or a web browser, the process is easy if you follow our instructions. This guide is based on our own hands-on experience, not just copied or pasted from other sources, so it’s straightforward to follow.
By setting the correct IP address, you ensure stable connectivity, easier access, and better performance for your surveillance system.