Have you just purchased an NVR N110W/N118W but don’t know how to add Imou cameras? Installing a reliable surveillance system is no longer limited to large businesses or high-end properties. Today, homeowners and small business owners can easily install a sophisticated security system using IP cameras and a Network Video Recorder (NVR). One popular combination is using Imou cameras with an N110W NVR.
In this guide, you will learn how to properly connect your Imou cameras to the N110W NVR, troubleshoot common issues, and optimize your system for long-term performance.
What Is an Imou Camera and NVR N110W/N118?
The Imou Camera is a smart IP-based surveillance device that supports remote monitoring, motion detection, and cloud integration. It is widely used for indoor and outdoor security.
The NVR N110W is a Network Video Recorder designed to store and manage video recordings from IP cameras. Instead of recording directly on the cameras, the NVR acts as a control center where all video data is stored, viewed, and managed.
When properly connected, this combination allows you to:
- Monitor multiple cameras in one location
- Storage recordings locally
- Improve system reliability
- Quickly access recordings when needed
Why Connect Imou Camera to NVR Instead of Using Only the App?
A customer contacted us requesting a way to display their Imou camera on a monitor. To achieve this, we recommended the NVR N110W, which allows multiple Imou cameras to be connected in one system and displayed simultaneously on a monitor.
Integrating with an NVR offers several advantages:
- Centralize Video Management
- Better Storage Control
- Continuous Recording
Using an NVR allows for greater storage capacity. While the maximum capacity for cameras is 256GB, an NVR can use a hard drive larger than 2TB. This means video storage will last longer.
Easy Guide: Set Up Imou Camera to NVR N110W in Minutes
Requirements
- An Imou IP camera (wired or Wi-Fi supported)
- NVR N110W or N118 device
- Ethernet cables
- The monitor and mouse are connected to the NVR. The NVR is connected to the monitor using an HDMI cable
- Stable internet connection
Step-by-Step Instructions
Step 1 – First, plug in both the cameras and the NVR to a power source. Next, activate the Imou cameras through the Imou Life app on your smartphone. Once completed, connect the NVR to your router using a LAN cable.
Step 2 – Open the main menu on your NVR.
Step 3 – Log in using your username and password, or use a pattern lock.
Step 4 – Go to Camera > Add Devices. The Imou camera will be detected automatically, but the status may appear in red at first.
Step 5 – Tap the pencil icon to modify the camera parameters.
Step 6 – In the password field, enter the verification code or security code from the Imou camera.
Step 7 – Tap OK to save the settings. If the status turns green, the Imou camera has been successfully connected to the NVR N110W.
Common Problems and Troubleshooting
Camera Not Showing in NVR
Based on our own experience and testing, the main reason why Imou cameras do not appear on the NVR or are not detected is that the cameras are not on the same network.
Fix:
- Restart router
- Check IP range
Incorrect Password Error
Imou cameras have a security code. Users often enter the code incorrectly. If it hasn’t been changed, the security code, or password, can be found on a label attached to the camera.
Fix:
- Reset camera
- Re-enter credentials carefully
Conclusion
Set up and Connecting Imou cameras to an N110W NVR may seem complicated at first, but once you understand the process, it becomes easy. The key is to ensure both devices are on the same network, using the correct protocol (ONVIF), and carefully entering the necessary settings. Using an NVR will make the stored videos last longer because it uses a larger storage capacity.
The guide above is based on hands-on testing, not simply copying from online guides, and is guaranteed to work.