Connect an EZVIZ camera to a Hikvision DVR/NVR – Connecting EZVIZ cameras to a Hikvision DVR or NVR can help you centralize your security system and monitor everything from one place. While the two brands are related, compatibility isn’t always automatic—so proper setup is crucial.
In this guide, you will learn in detail how to connect your EZVIZ camera to Hikvision DVR/NVR step by step based on our experience.
Can EZVIZ Cameras Connect to Hikvision DVR/NVR?
Yes, almost all EZVIZ camera models we tested can be connected to Hikvision DVR/NVR systems.
EZVIZ is actually a consumer-focused brand originally developed by Hikvision. However, since then, EZVIZ devices have been designed to work primarily within their own ecosystem. To connect it manually, the EZVIZ camera you are using must support the ONVIF protocol, which allows devices from different brands to communicate.
How to Easily Connect EZVIZ Camera to Hikvision DVR/NVR?
Devices You Need
- EZVIZ camera
- Hikvision DVR or NVR
- Router or local network
Important Settings
- Camera IP Address
- ONVIF enabled (if supported) – Read how to enable ONVIF on EZVIZ cameras
- Correct username and password or verification code
Step-by-Step Instructions
Step 1 – Right click on the screen display on the DVR/NVR and select Menu.
Step 2 – Log in using your username and password. Or log in using the pattern you created earlier.
Step 3 – Select Settings > Camera > Camera. The Online Device List will display the detected EZVIZ cameras.
Step 4 – Check the camera and tap the “+Add” button.
Step 5 – The camera will move to the top. The status is still marked red, indicating the camera is not connected to the DVR/NVR. Tap the pencil icon to change the parameters.
Step 6 – Enter camera password. Then tap OK.
Step 7 – If the status changes to green, it indicates that the EZVIZ camera has been successfully connected to the Hikvision DVR/NVR.
EZVIZ Camera Display on Hikvision DVR/NVR
Common Problems and How to Fix Them
Camera Not Detected
- Make sure both devices, DVR and EZVIZ camera, are connected to the same network, either using a LAN cable or a Wi-Fi network.
- Make sure the EZVIZ camera has ONVIF features.
Incorrect Username or Password
- Reset the camera credentials
- The default username of the EZVIZ camera is “admin” and the password is the verification code on the label.
Conclusion
Connecting EZVIZ cameras to Hikvision DVRs/NVRs is possible, but it depends on compatibility—especially ONVIF support. By following the steps above, you can successfully integrate your devices and manage your security system more efficiently. This guide is based on personal experience and has been tested and proven successful.
If your cameras don’t support ONVIF, consider alternative solutions such as using compatible hardware or specialized software.